-40%
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC
JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC

JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL Naze32 DSM2 Brushed FC

$ 26.34

Availability: 100 in stock
  • Type: Frame Kit
  • Battery Coulomb: N/A
  • Version: ARF
  • MPN: Does Not Apply
  • Battery (mAh): N/A
  • Package weight: 0.246 kg
  • Package Contents: 1 x Airframe ( including Carbon Fiber Frame, Alumi
  • Required Assembly: Almost Ready/ARR/ARF (Accs required)
  • All returns accepted: ReturnsNotAccepted
  • Battery Voltage: 1S
  • Condition: New
  • Product size (L x W x H): 9.50 x 9.50 x 0.40 cm / 3.74 x 3.74 x 0.16 inches
  • Brand: JJRC
  • Package size (L x W x H): 16.00 x 16.00 x 9.00 cm / 6.3 x 6.3 x 3.54 inches
  • Model: T1

    Description

    JJRC JJPRO T1 95mm FPV Racing Drone ARF 5.8G 40CH 800TVL / Naze32 Brushed FC.
    Additional Battery and Transmitter will be required for flight
    .  A computer with Cleanflight will also be required to make configuration adjustments and FPV receiver & display will be required for optional FPV use.
    Condition is New.
    Please note although these are brand new, they were manufactured a few years ago (new old stock) so
    the included 600mAh battery is likely no longer adequate
    if it works at all.  For this reason these are being considered Almost Ready to Fly (ARF) and will likely require a 1s 600mAh, or similar compatible battery in addition to a DSM2 compatible transmitter.
    Package contents:
    1xAirframe, 18Naze32 Flight Controller(Integrated DSM2 Receiver ),
    1x5.8G 800TVL FPV Camera,
    4xMD8520 Motor
    4xOrange Propeller, 4xBlack Propeller,
    1xUSB Charger,
    1xPropeller Puller,
    1xChinese/English User Manual
    Features:
    Naze32 brushed flight controller includes integrated DSM2 receiver
    The open source flight controller provides easy access to parameters adjustment with GUI of CleanFlight Configuration and BaseFlight Configuration
    Firmware upgradable via Micro USB port
    5.8G 40CH ( with RaceBand ) FPV transmitter, 1/3 inch 800TVL 150 degree FOV CMOS camera
    Specifications:
    Airframe:
    Wheelbase: 95mm
    Bottom plate thickness: 1.5mm
    Upper plate thickness: 1mm
    Battery: 3.7V 600mah 30C li-ion battery
    MD8520 Coreless Motor: 8.5X20mm
    Naze32 + DSM2 brushed flight controller (integrated board):
    Using 32-bit ARM microprocessor, working in 3.3V / 72MHZ
    With gyroscope, support manual mode, horizontal mode
    Firmware upgrades and tuning can be performed via Micro-USB There are Baseflight-Configurator and Cleanflight-Configuration
    Camera:
    FOV 150' horizontal viewing angle, 170' diagonal viewing angle
    NTSC / PAL system can be a key switch
    Operating voltage: 3.6-5.5V
    Sensor: 1/3'' CMOS
    5.8GHz FPV:
    Support video format: NTSC / PAL
    Output Impedance: 75 Ohm
    Output signal strength: 12-14dB
    Operating voltage: 3.6-5.5V
    Audio carrier: 6.5MHz
    Channel: 40CH (Frequency channels list, please refer to the product specification)
    Shipped with USPS First Class Package.